Step 1 - Water plant thoroughly before applying Driwater.
Step 2 - Dig a hole that is 2" in diameter and 3" deep. Gently push the tube midway into the root zone, making certain it does not reach the bottom of the container. Lightly water inside the tube.
Step 3 - Carefully cut open Gel Pac from end to end, remove DRiWATER from plastic casing and drop into the Tube. (The Gel Pac will slide easily into the Tube if one end is dipped into water first.) Be sure DRiWATER makes contact with soil at bottom of the Tube. Place cap on Tube, water plant thoroughly and drain.
Step 4 – When Tube is low or empty, refill with an additional Gel Pac, sold separately. If there is more DRiWATER than fits in the Tube, simply break off excess with fingers and add to another Tube or place directly in soil.
Hints & Tips:
|We Also Recommend :|