Adjust-A-Gate Gate Kit 2 Rail 36" high gate, 60"-96" wide

The Adjust-A-Gate system is always the right solution for wooden fence gates. Installation is easy and the results look professionally done.
Hinges tested up to 3000 lbs. per hinge before bending
Fits 3 foot high gates and widths from 5-8 feet
Unique steel sleeve construction allows frame to adjust to any opening for a perfect fit and with its tough, corrosion resistant powder coating that is colored to coordinate with the wood.
Adjustable Truss Cable - Installs diagonally across gate frame to prevent sagging.
$144.84
SKU: JC-AG60-36
Delivery date Usually ships within 5 days
+ -
Steel Gate Kit Features:
  • 1-1/2" galvanized steel square frame, .045" wall thickness
  • Powder coat finish ensures longer-lasting finish
  • Adjustable anti-sag diagonal truss cable
  • All hardware & screws included (gate hinges & latch)
  • Hinges tested up to 3000 lbs. per hinge before bending
  • Wood not included
  • These gate kits use a unique sleeve-system that allows the gate to be adjusted to fit the gate opening.
  • The gate kits can be used as a single OR double swing gates
Suggested tools required:
  • 1 - 9/16" wrench or adjustable end wrench
  • 1 - 5/16" wrench or adjustable end wrench
  • 1 - Phillips screwdriver
  • 1 - pair wire cutters
  • 1 - drill
  • 1 - 1/2" spade drill bit
Steel Gate Kit Features:
  • 1-1/2" galvanized steel square frame, .045" wall thickness
  • Powder coat finish ensures longer-lasting finish
  • Adjustable anti-sag diagonal truss cable
  • All hardware & screws included (gate hinges & latch)
  • Hinges tested up to 3000 lbs. per hinge before bending
  • Wood not included
  • These gate kits use a unique sleeve-system that allows the gate to be adjusted to fit the gate opening.
  • The gate kits can be used as a single OR double swing gates
Suggested tools required:
  • 1 - 9/16" wrench or adjustable end wrench
  • 1 - 5/16" wrench or adjustable end wrench
  • 1 - Phillips screwdriver
  • 1 - pair wire cutters
  • 1 - drill
  • 1 - 1/2" spade drill bit